C4 Corvette Tech Strategies

Computer Diagnostics
All C4 models are equipped with ">Auto diagnostic tools. Fault codes is often reviewed by putting the computer method inside the diagnostics mode. The process to initiate the diagnostic mode varies by model year. Accessing the actual time information requires the use of a OBD I or OBD II scanning tool. The scanning tool connects to a plug positioned on the driver's side from the auto below the dash. Information is offered from the numerous engine sensors like coolant temperature, timing and oil pressure

Electronic Climate Control
Electronic climate handle was an choice out there on the later years of the C4 model. The electronic heating and air conditioning has a built-in diagnostic mode to report program failures. To access the diagnostic mode, turn the ignition crucial for the first position, and press and hold the "up" and "down" fan buttons for roughly five seconds. Fault codes will appear within the LCD on the electronic climate control unit.

Brakes
The C4 is equipped with four wheel disc brakes in the factory. Poor braking performance can occur for a number of reasons. Brake fluid that is old or contains air will result in a spongy or soft pedal. Replacement on the fluid, and bleeding air from the program is necessary for firm brake pedal operation. Many types of brake pads are obtainable for the C4 to accommodate street, track and racing activities. Selecting brake pads best suited for the primary use in the Corvette is critical for optimum performance.

Suspension Bushings
Many C4 Corvettes are high mileage vehicles that feel loose or difficult to drive. A primary cause is often worn suspension bushings. The suspension bushing allow the various suspension components to move in a specific ">Auto code scanner range of motion. Replacement of these bushings with either original equipment or after-market bushings will assist in restoring the handling characteristics from the Corvette.