1
Locate the trapezoidal-shaped Diagnostic Link Connector (DLC) port under the driver's side dashboard ">Vehicle Diagnostic equipment. This really is typically just left of the steering column.
2
Plug the OBD code scanner into the DLC port.
3
Put the key in to the ignition and turn it two clicks forward, taking care not to start the engine ">Auto diagnostic tool. Wait for this to power on the scanner or find the on/off button and press it.
4
Select the command "Read Codes" or something similar to this.
5
Wait for the codes to display and write them down on a piece of paper.
6
Look up the codes in the code scanner's manual to get the exact diagnosis.
7
Unplug the code scanner and have your car serviced or repaired based on the difficulty codes.
没有评论:
发表评论